The Geoweb® Load Support System

Request for Project Evaluation Form

Need a preliminary project evaluation? We can assist you in developing the best solution to your problem. Fill out the pertinent project information below, then click the Submit button. If preferred, the Request for Project Evaluation (RFPE) document is also available in .pdf form for completing and faxing to us at Fax: 1-920-738-1222.

Download RFPE Form

Allow a few days turnaround for each project request. To check the status of your request, contact Presto Geosystems either by Phone: 1-800-548-3424; 1-920-738-1328 or email: info@prestogeo.com, or contact your local distributor/representative.

The project evaluation will be performed based on specification characteristics, structural values and limits for the Geoweb material manufactured under an ISO 9001:2008 Quality Management program.Any use of this recommendation and/or drawing with materials manufactured by others than Presto Products Company causes the recommendation and/or drawings to become invalid.

Project Name (required)
Project City (required)
Project State or Province (required)
Project Country (required)
Estimated Geoweb Area (required)

m2 (ft2)

Describe problem to be solved by the Geoweb system (required)

Person Requesting Information

Relationship with project (required)
If other, please explain (required)
Company (required)
Contact name (required)
Street Address (required)
City (required)
State (required)
Zip or Postal Code (required)
Phone Number (required)
Fax Number (required)
Email Address (required)

Distributor or Representative Information (if known)

Representative Company (required)
Representative Contact Name (required)
Office Location (required)
Distributor or Representative Project Number (required)

Design Information

For what is the Load Support Structure used? (required)
If other use, please specify (required)
What is the final wearing surface of the Load Support System? (required)
If other surface, please specify (required)

What are the Traffic Details?

NOTE: If traffic varies (eg. highway pavement), provide traffic count data (or projected traffic data), including distribution of axle loads, or design traffic (eg. Equivalent Single Axle Loads, ESAL's) as determined by the highway authority.

Maximum axle load (required)

kg (lb)

Passes/day (required)
Number of tires/axle (required)
Design life (years) (required)
Tire pressure (required)

MPa (lb/in2)

Subgrade Soil Properties

Description (required)

eg. Medium dense silty sand, very soft clay, etc.

What is the subgrade soil strength? (required)
Please enter value(s) of chosen method(s) (required)

Other Test Data or Subsurface Information

Gradation

provide curve

Moisture content

in percentage

Liquid limit
Plasticity index
Depth to water table

in m (ft)

Construction Material Details

Geoweb Infill

Unit density

kN/m3 (lb/ft3)

Angle of internal friction

degree

Asphalt Concrete

Modulus of elasticity

MPa (lb/in2)

Other

Please specify

Aggregate Base

Compacted CBR value

in percentage

R-Value
Modulus of elasticity

MPa (lb/in2)

Other

Aggregate Subbase

Compacted CBR value

in percentage

R-Value
Modulus of elasticity

MPa (lb/in2)

Other

Conventional Pavement Design and Material/Construction Costs

NOTE: If a conventional pavement design has not been prepared, provide typical cost data for the region.

Portland Cement Concrete

Thickness

mm (in)

Cost

Asphalt Concrete

Thickness

mm (in)

Cost

Bituminous Base

Thickness

mm (in)

Cost

Aggregate Base

Thickness

mm (in)

Cost

Aggregate Subbase

Thickness

mm (in)

Cost

Soil Stabilization

Thickness

mm (in)

Cost

Undercutting Subgrade Soil

Thickness

mm (in)

Cost

Geosynthetic

Thickness

mm (in)

Cost

Deadline Dates

Preliminary design needed by date (required)
Projected bid date (required)
Planned construction startup date (required)
Approvals and certifications required by (required)

Please list the agencies

Geoweb - Geoblock - Filterpave - Geopave
GeowebGeoblockFilterpaveGeopaveGeorunnerGeoterra